VGA + Audio + RS232 over UTP, Skew Correction, Extension Port VGA + Audio + RS232 over UTP, Skew Correction, Extension Port
3.5 stars - "Review for VGA + Audio + RS232 over UTP, Skew Correction, Extension Port" This VGA + Audio + RS232 over UTP, Skew Correction, Extension Port is the best Switchers DAs Extenders I have tried.
  • VGA + Audio + RS232 over UTP, Skew Correction, Extension Port - Image 1
  • VGA + Audio + RS232 over UTP, Skew Correction, Extension Port - Image 2
  • VGA + Audio + RS232 over UTP, Skew Correction, Extension Port - Image 1
  • VGA + Audio + RS232 over UTP, Skew Correction, Extension Port - Image 2
Hall Research

VGA + Audio + RS232 over UTP, Skew Correction, Extension Port

Product ID: URA-232-XT-E
Brand: Hall Research

View or buy the Switchers DAs Extenders Audio Visual - VGA + Audio + RS232 over UTP, Skew Correction, Extension Port from Hall Research to discover other options and shipping details.

Description

Hall Research
VGA + Audio + RS232 over UTP, Skew Correction, Extension Port

VGA + Audio + RS232 Over UTP Receiver with Extension

The URA-232-XT Mini-Cat® is a daisy-chainable Video, Audio and RS232 over UTP (Cat5/5e/6) receiver.
It has an RJ45 input, with a compensated RJ45 output for driving downstream receivers.
This eliminates the need for running separate cables from every receiver back to the sender (in star or home-run fashion) – a very useful feature when several receivers are located in a line going away from the sender.
It can accommodate a total daisy-chain length of 3,750 feet (> 1 Km) with up to 5 devices in each chain. supports resolutions up to 1920 x 1200 at 60Hz.
The URA-232-XT can be extended with more URA, URA-SKU, URA-XT or URA-232-XT receivers. Made in the USA.


In a typical application the RS-232 port on the unit is used for transmit only to issue power commands to connected displays (the RS-232 RX pin is used for programming the URA-232-XT for remote trigger operation).
There are 3 ways to issue commands please see 
Serial Command Modes Demystified for further information.

Important note about use with YPbPr signal

Using the standard URA-232-XT with Component Video can produce excessive brightness and contrast. Therefore, this unit is not recommended for use with Component Video (YPbPr). 

For use with YPbPr signal, please order the model URA-232-XT-CP. The cost is the same and the unit is identical to URA-232-xt in every way except it is optimized for Component Video signal levels.




  • Receives audio and video on a single CATx cable
  • Adjustable cable length compensation to 1000 ft
  • Digitally controlled adjustment eliminates tweaking pots
  • Supports resolutions up to 1920x1200 at any refresh rate
  • Up to 3750 feet maximum cable from source to last URA
  • Compact & rugged metal enclosure with mounting holes
  • Daisy-chain upto 5 URA-Xt's in a single run
  • The URA-SKU and URA-XT units have RGB skew correction
Video Gain:
  • Unity
Video Standards:
  • VGA through UXGA, RGBHV, RGBS, RGsB, RsGsBs, Component Video (bi-/tri-level sync)
Connectors:
  • (1) RJ-45 Female (CATx Input)
  • (1) HD15 Female (Video Output)
  • (1) 3.5mm Female (Audio Output)
  • (1) 2.1mm Female (Power Input)
Nominal Amplitude:
  • 1 V p-p for Y of component video 
  • 0.7 V p-p for RGB and for Pr and Pb of component video
  • 4.0 V to 5.0 V p-p, for TTL Sync signals of RGBHV, RGBS
Impedance:
  • 75 ohms
Resolution:
  • Up to 1920x1200 non-interlaced at 60Hz
Max Distance:
  • Up to 1000 feet depending on resolution
Audio Gain:
  • Unbalanced output: 0 dB
Frequency Response:
  • 20hz to 20kHz, +/- 1 dB
Audio Type:
  • Monaural, Simulated Stereo (L+R)
THD + Noise:
  • 0.2% @ 1kHz, 0.3% @ 20kHz at nominal level
Recommended Cable:
Power Supply:
  • 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2A regulated; 2.1mm
Temperature
  • Humidity:
  • Storage: -40 to +158 degF (-40 to +70 degC) / 10% to 90%, non-condensing
  • Operating: +32 to +122 degF (0 to +50 degC) / 10% to 90%, non-condensing
Cooling:
  • Convection, vents on each end
Mounting:
  • Brackets at each end with screw hole provided for Wall or Rack mounting
Enclosure:
  • Metal
Dimensions:
  • 1.18" H x 2.75" W x 3.85" D
  • (30mm H x 70mm W x 98mm D)
  • Depth excludes connectors
Weight:
  • Product - 0.75 lb (0.35 kg)
  • Shipping - 1.5 lbs (0.70 kg)
Vibration:
  • ISTA 1A in carton (International Safe Transit Association)
Safety:
  • CE
EMI/EMC:
  • CE/FCC Class A
MTBF:
  • 90,000 hours
Warranty:
  • 2 years parts and labor
More Switchers DAs Extenders and others in our range
Subscribe to GTP iCommerce Pty Ltd Clothing and Hardware